AVW: Broadcast, RF and Audio Visual Equipment Wholesalers

RDL Intercom Amplifier

ST-IC1

$427.91

* Ex GST... Call us for Discounts and the latest Trade pricing!

Call for delivery - limited stock


ST-IC1

 

Intercom Amplifier


  • Intercom Electronics
  • Intercom with Push-to-Talk
  • Mic or Speaker Input
  • 8 Ω or 45 Ω Speakers
  • Bidirectional Communication Option

 

Description

The ST-IC1 is the ideal choice where an intercom system is to be installed, or where an amplifier is needed to bring a mic level up to a 1 W speaker level with optional muting capability.

The ST-IC1 has one input, one output and two muting control terminals.

The input accepts a dynamic mic, a condenser mic (a phantom supply input terminal is provided to power condenser mics), an 8 Ω speaker or a 45 Ω speaker. The gain range of the module is sufficient to accommodate this wide variety of source levels.

The output is ground-referenced, and drives more than 1 watt RMS into an 8 Ω load. The output circuit can be connected to any load impedance of 4 Ω or greater.

 

Specifications

TYPICAL PERFORMANCE
Input: > 600 Ω balanced
Frequency Response: 300 Hz to 4 kHz (± 2 dB, filtered for voice-band intelligibility)
Gain Range: OFF to 70 dB (adjustable)
Input level required to produce 1 W RMS: -60 dBu (8 Ω source); -55 dBu (600 Ω source)
THD+N: < 1% @ 1 kHz, referred to 1 W @ 50 dB gain
Residual Noise (unmuted output below 1 W): < 75 dB @ 60 dB gain setting
Operating Output Power: 1 W RMS
Maximum Output Power (before clipping): 1.5 W RMS
Mute Inputs (2): Trigger on high to low transition, 2 mA, 15 V pullup;
Trigger on low to high transition, 0.1 mA
Mute Attenuation: > 115 dB @ 1 kHz
Muting Switching Type: Solid State – no relay contacts used
Mute Release Delay: 15 ms
Ambient Operating Environment: 0° C to 40° C
Power Requirement: GROUND-REFERENCED, 24 Vdc @ 175 mA

 

Dimensions

 

Feel free to email or call us to purchase this Product.

https://www.rdlnet.com/product.php?page=105